断裂带中层天然气成藏特征--以济阳坳陷东营北部断裂带为例

文章分析了东营北部断裂带中层天然气藏的气体性质、储盖组合类型、温压环境对中层气成藏的影响以及断裂活动对中层气成藏的制约；剖析了三角洲沉积体系在中层天然气成藏中的纽带作用，建立了断裂带中层天然气运聚模式、成藏模式；总结出了中层天然气藏横向分布特征及纵向成藏序列，对于富油盆地断裂带天然气勘探具有很好的指导意义。     

谈公路路面工程质量控制

介绍了公路路面工程质量控制要点 ,从路面的平整度、建立健全质量保证体系等方面进行了论述 ,指出强化工程监理、加大监督力度和提高人员素质是确保工程质量的有效途径     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

河南油田潜油电泵井远程无线监控系统研制

针对河南油田研制了一种潜油电泵井远程无线监控系统。详细介绍了该系统的软硬件组成及工作原理。系统研制的主要内容包括：数据及指令传输监控软件的开发。利用SQL Server实现相关数据的管理和实时数据的网络广播；该系统在河南油田建成后．缩短了开井周期。减轻了人工劳动强度，提高了采油效率。实现了电泵井的现代化管理。     

自适应比例因子模糊控制器在异步电动机调速系统中的应用

为了降低转子电阻变化对异步电动机矢量控制系统性能的影响，本文把自适应比例因子模糊控制器应用到了矢量控制系统中。介绍了自适应比例因子模糊控制方法的綦本原理，给出了使用自适应比例因子模糊控制器的异步电动机矢量控制系统的结构框图，对主模糊控制器和辅助模糊控制器进行了设计。仿真实验结果表明，采用这种控制方法的调速系统不仅具有优良的动态性能，而且对转子电阻变化具有很强的鲁棒性。     

Determination of optimal feedback terminal controllers for general boundary conditions using generating functions

Given a nonlinear system and a performance index to be minimized, we present a general approach to expressing the finite time optimal feedback control law applicable to different types of boundary conditions. Starting from the necessary conditions for optimality represented by a Hamiltonian system, we solve the Hamilton-Jacobi equation for a generating function for a specific canonical transformation. This enables us to obtain the optimal feedback control for fundamentally different sets of boundary conditions only using a series of algebraic manipulations and partial differentiations. Furthermore, the proposed approach reveals an insight that the optimal cost functions for a given dynamical system can be decomposed into a single generating function that is only a function of the dynamics plus a term representing the boundary conditions. This result is formalized as a theorem. The whole procedure provides an advantage over methods rooted in dynamic programming, which require one to solve the Hamilton-Jacobi-Bellman equation repetitively for each type of boundary condition. The cost of this favorable versatility is doubling the dimension of the partial differential equation to be solved.     

A physically based method for triangulated surface flattening

This paper introduces a new method of generating 2D flat patterns from a 3D triangulated surface by opening the bending configuration of each winged triangle pair. The flattening can be divided into four steps. First, a 3D triangulated surface is modeled with a mass-spring system that simulates the surface deformation during the flattening. Second, an unwrapping force field is built to drive the mass-spring system to a developable configuration through the numerical integration. Third, a velocity redistribution procedure is initiated to average velocity variances among the particles. Finally, the mass-spring system is forced to collide with a plane, and the final 2D pattern is generated after all the winged triangle pairs are spread onto the colliding plane. To retain the size and area of the original 3D surface, a strain control mechanism is introduced to keep the springs from over-elongation or over-shrinkage at each time step.     

红外遥控倒计时器的设计与实现

简要介绍了红外遥控的原理以及红外信号编/解码方法,设计并实现了一种可通过红外信号遥控的倒计时器.该设计以8位单片机AT89C2051为核心,利用普通家电遥控器和红外接收头HS0038实现红外信号的发送和接收,一次性可编程语音芯片API840N用于产生提示语音,完成的倒计时器具有设计简洁、计时精度高、操作方便等优点.     

DSP技术在液压混合动力汽车能源控制方面的应用

文章分析了液压混合动力汽车的发展趋势,简述数字信号处理器(DSP)作为控制器的优势和DSP作为控制器对并联式混合动力液压车的能源控制的工作原理,给出了能源控制系统DSP信号流程图和主程序流程图。测试结果表明,DSP能源控制系统能够比较精确的对液压混合动力车的能量消耗与分配进行控制,具有很好的应用前景。     

试述盐厂重要环境因素的控制

依据GB/T14001标准,阐述了制盐生产环境因素的识别,重要环境因素的评定及其控制.同时指出了消除重要环境因素的影响,保护环境是实施污染预防的有效途径.